ANTI-SEIZE BRUSH DISPENSER PUMP

AS022 ANTI-SEIZE & LUBRICANT is a special blend of extra fine graphite and aluminum particles in synthetic oils.  It's unique qualities prevent corrosion, seizure, and galling where two metals (including stainless steels) must come together to provide a tight make up. AS022 ANTI-SEIZE is effective to 2200ºF and also functions as a high temperature lubricant and sealant as well (we even package it in grease cartridges).

AS022 ANTI-SEIZE is absolutely non-melting, will not drip or run, and is superior to copper or lead based lubricants because it eliminates electrolysis, withstands higher temperatures and pressures and gives cleaner breakouts from high torques.

Unique Anti-Seize dispenser pump for 16oz cans allows use of all the product in the can, cleaner application of the product (no messy hands), and keeps product from becoming contaminated. (Not included)

• Meets US military Spec:  MIL-PRF-907E

• Can be safely used on stainless or other alloys

• Withstands high temperatures and high torque

TECHNICAL DATA:

Temperature Range.............................................................-20º to 2200º F

Flash Point.............................................................................C.O.C. 310º F

NLGI Grade.......................................................................................No. 1

Water Resistance........................................................................Insoluble

Protective equipment......................................................................None

Poison Classification...................................................................Non-toxic

Particle size...................................................................Less than 1 micron

Product Type...........................................................Anti-Seize Compound

Product Color.........................................................................Silver / Gray

Temp Range (Solids).......................................................-297º F to +450º F

Temp Range (Base Oil).....................................................-30º F to +500º F

Coefficient of Friction.........................................................................0.14

Penetration (ASTM-D-217)...........................................................NLGI 1.5

Dropping Point (ASTM-D-2265).........................................................None

TYPICAL APPLICATIONS:

• Rollers and conveyors                                • Gears, Chains, and Drives

• All Threaded Fittings                                  • Gaskets, Flanges, and O-rings

• Valve Stems and Cages                              • Furnaces and Burner Assemblies

• Cylinder Head Assemblies                        • Key ways, and Shaft Coupling Bolts

• Low RPM Bearings                                   • Fuel injectors & Spark Plugs

THE USEFUL TEMPERATURE RANGE FOR VARIOUS APPLICATIONS:

• For anti-seize use, -30º  F to +2200º F

• As a bearing lubricant, -30º F to +450º F

• As a slide lubricant, -30º F to +1800º F

• As a protective coating, -29º F to +2200º F

RESTRICTIONS: 

As with all petroleum base anti-seizes, these products should NOT be used in oxygen service.

NOTE:   Corrosive inhibitors: Conventional Imadozoline Derivate,  EP Additive: diester Type - contains no silicone polymers, molybdenum disulfide, phosphorous, sulfur, or metal salt. Raw materials used for manufacturing AS022 contains 0 ppm chlorides and 0 ppm heavy metals.  AS022 in grease cartridge fortified with molybdenum disulfied.